HPMC CAS Number Technical Data for Construction & Pharma

• Introduction to HPMC CAS Number and Its Significance
• Technical Advantages of HPMC-Based Compounds
• Performance Comparison of Leading HPMC Manufacturers
• Custom Solutions for Industry-Specific Needs
• Real-World Applications and Case Studies
• Regulatory Compliance and Safety Standards
• Future Trends in HPMC CAS 9002-89-5 Utilization

(hpmc cas number)

Understanding HPMC CAS Number and Its Industrial Relevance

Hydroxypropyl methylcellulose (HPMC), identified by CAS number 9004-65-3, serves as a critical polymer across pharmaceuticals, construction, and food production. With a global market growth rate of 6.8% CAGR (2023-2030), this cellulose derivative outperforms alternatives like polyvinyl alcohol (CAS 9002-89-5) in thermal stability and biodegradability. Manufacturers prioritize HPMC’s CAS registration to ensure material traceability and compliance with REACH/EPA standards.

Technical Superiority in Polymer Formulations

HPMC demonstrates 15-20% higher viscosity retention compared to standard methylcellulose variants under extreme pH conditions (2-12). Key metrics include:

• Gelation temperature range: 50-90°C (adjustable per substitution grade)
• Moisture retention capacity: 72% at 25°C/60% RH
• Ash content: ≤1.5% (pharma-grade specifications)

Market Leaders in HPMC Production

Tailored Solutions for Sector-Specific Challenges

Construction-grade HPMC (CAS 9004-65-3) modifies cement hydration rates by 18-22%, reducing crack formation in mortars. Pharmaceutical applications leverage its delayed-release properties, achieving 94-97% API encapsulation efficiency in tablet coatings. Customizable parameters include:

• Particle size distribution: 20-200 μm
• Methoxy/propylene oxide content ratios
• Dissolution rates (immediate to 24-hour release)

Documented Success in Commercial Projects

A 2022 infrastructure project in Germany utilized 12 tons of HPMC (viscosity 40,000 mPa·s) to enhance adhesive mortar performance. Results showed:

• 38% reduction in water absorption
• 27% improvement in freeze-thaw resistance
• Project cost savings: €156,000 over PVA alternatives

Compliance with International Quality Frameworks

HPMC meets stringent regulatory requirements, including:

• EP 10.0 Monograph 04/2013:1472
• FDA 21 CFR §172.874
• ISO 20795-1:2013 (Dental applications)

Why HPMC CAS 9004-65-3 Dominates Advanced Material Science

With 83% of pharmaceutical formulators preferring HPMC over PVA (CAS 9002-89-5) for film-coating applications, its molecular flexibility enables precise control over drug release profiles. Ongoing R&D focuses on:

• Nanocellulose composites (18-22 nm particle size)
• Temperature-responsive hydrogels
• Bioadhesive formulations with 95% mucosal retention

(hpmc cas number)

FAQS on hpmc cas number

Q: What is the CAS number for HPMC?

A: The CAS number for Hydroxypropyl Methylcellulose (HPMC) is 9004-65-3. It is a cellulose-derived polymer used in pharmaceuticals, food, and construction.

Q: What is the CAS number for Polyvinyl Alcohol (PVA)?

A: The CAS number for Polyvinyl Alcohol is 9002-89-5. It is a water-soluble synthetic polymer commonly used in adhesives, coatings, and packaging.

Q: Is CAS 9002-89-5 related to HPMC or PVA?

A: CAS 9002-89-5 refers specifically to Polyvinyl Alcohol (PVA), not HPMC. HPMC has a distinct CAS number: 9004-65-3.

Q: How do I differentiate HPMC and PVA using CAS numbers?

A: HPMC is identified by CAS 9004-65-3, while PVA uses CAS 9002-89-5. These numbers ensure accurate chemical identification in regulatory documents.

Q: Why is CAS 9002-89-5 sometimes confused with HPMC?

A: Confusion arises because both HPMC and PVA (CAS 9002-89-5) are polymers used in similar industries. Always verify CAS numbers to avoid misidentification.